Boating Safety Is For Life

Wednesday, July 27, 2016

Boat Building News


BOISE, Idaho (Legal Newsline) — Christopher Bohnenkamp, owner of the now-defunct Bohnenkamp's Whitewater Customs Inc. and Treasure Valley ...
 
 
From high performance yacht manufacturing to pioneering the caravan industry, Zone RV is rapidly expanding as its innovative technology makes ...
 
 
Once a chef, Jory Schmeling has found niche as wooden boat builder. Jory Schmeling, 33, general manager of StanCraft Wooden Boats, works 50-70 ...
 
 
Fabbro Marine, a local manufacturer of world-renowned Cape Horn offshore boats, is scheduled to break ground Wednesday on their new facility at ...
 
The U.S. Department of Labor's Occupational Safety and Health Administration issued citations to Chaparral Boats on July 18 for one repeated and ...
 
Relatively few people know boat building is still alive and well in Patchogue, once a national hub for the craft. At any given time, you might find ..
  In addition to the copper pesticide study, University of Minnesota researchers, a lake marina owner and boat manufacturer are looking at how boat .
 
 
"It is stable in pitch, heave and roll, so the boat's safety doesn't depend on an active control system, which would be complex, redundant and ...
 
 
Outdated wiring and a lack of proper safety equipment and routine maintenance on docks and boats can cause such situations where electricity ...
 
There, two of Tasmania's master boat-builders, Michael Wilson and Warren Innes, worked with breathtaking precision to recreate a world-class vessel .
 
 
Maritime engineering degrees in ocean engineering, naval architecture and marine and offshore engineering are also offered. These degrees are ...
 
  PORT HADLOCK — The Northwest School of Wooden Boatbuilding has been designated a Veteran Supportive Campus by the state Department of .
 
Jacob, along with brother Noah and buddy Ashton Ivany, headed to the museum earlier this month to build boats and learn about boat-making ...
 
... a difference, Grossi said, as did the involvement of racing shell builder George Pocock, who pioneered the use of Western red cedar in his shells.
 
CO2 warning stickers are for boats with small resting areas, and should be in ... Boating safety courses will also be required to give information on the ...
 
The Northwest School of Wooden Boatbuilding is hosting a four-day training on fundamental marine electrical systems Sept. 19-22, with support from ...

Thursday, July 21, 2016

Boat Building News


BOISE - Idaho Attorney General Lawrence Wasden has resolved a 2016 lawsuit against a former Boise jet boat manufacturer accused of failing to ...
 
Merced is home to the Centurion manufacturing building on Grogan ... “They've never been in a boat and they build them every day,” Mauzy said.
 
The teams were participating in the Biddeford Boatbuilding Festival, a two-day event that started Saturday morning at 9 a.m. and ended at 5 p.m. 
 
Thankfully no one was reported injured, but the sinking has prompted an investigation of the boat company and highlighted questionable safety ...
 
  Changwon National University, which launched its Department of Naval Architecture and Marine Engineering in 2008, is suggesting that students look 

The company, which currently has 40 employees, is looking to recruit a further 15 skilled boat builders and has plans to develop a workshop next to its ...
 P
The Stonehouse-headquarted firm had initially feared it would have to shed 350 workers as it restructured in light of huge challenges in its global
 
Founded in 1993, IYRS operates three accredited schools — composites technology, boatbuilding, and restoration and marine systems.
  The U.S. Coast Guard alerts all boat operators to routinely check their lifejackets for possible deterioration after two vessels were found with more than
 

Monday, July 18, 2016

Boat Building News


Grand-Craft Boats is in the process of manufacturing the prototype of its sport powerboat, which will be produced at a 10,000-square-foot facility at 60


This timber, they speculated, would be ideal for boat building. More than two centuries on, these explorers' theories continue to be proved correct, .


ACI President Cory Armstrong sees a bright future in what he calls the "automotive" model of boatbuilding – designing a standard product line with ...
 
 
The Harbin University concentrates on naval architecture and marine engineering. The Maritime University is a home for 5000 students at present and ...
 
The festival includes “Carrying On 100 Years of Boatbuilding Tradition,” by sixth generation, Maine lobster-boat builders, the Lowell brothers, at 6:30 ...
 
Two weeks ago, it purchased the former Lazzara yacht-building facility off of South Westshore Boulevard, near the Westshore Yacht Club and the Hula ..
 
IBEX, the largest North American trade event for boat building, design and maintenance, will offer 550+ exhibiting companies – of which over 100 are ...
 
“Terrigal 30 was designed by the boat builder's naval architecture in accordance with the 2C Survey standards and signed off by the AMSA-accredited ...
 
CEDARVILLE — Clas Nilstoft, of Harbor Springs, Michigan, and his son Erik are attending a “Build Your Own Boat” workshop this week at Great Lakes ...
 

Friday, July 15, 2016

Boat Building News


... 2016 - Brunswick Corporation (BC) today announced it has acquired Thunder Jet, a designer and builder of heavy-gauge aluminum (HGA) boats.
 
  The Portchester-based boat builder is relocating to Units 3a & 3b Hythe Marine Park, Shore Road, Hythe, near Southampton. The new premises will ..
 
But one Searsport family is working to keep the small boat-building tradition alive and thriving in a busy workshop on Mount Ephraim Road. Here, Dale ...
 
 
Russia's Kalashnikov company, makers of the world-famous AK-47 assault rifle, has begun deliveries of their first transport and amphibious assault ...
 
 
The National Fire Protection Association (NFPA) and Electrical Safety Foundation International (ESFI) are joining forces to remind boaters, marina ...
 
 
Grady-White is the latest large boatbuilder to join the marine industry's ... Grady-White Boats joined the Marine Retailers Association of the Americas at ...
 
 
The Society of Naval Architects and Marine Engineers will present its annual medals and awards during the SNAME Maritime Convention Nov. 1-5 at ...
 

Thursday, July 14, 2016

Boat Building News

facebook
    ABYC Expands Outreach to Help Solve Skilled Workforce Needs
Annapolis, MD – The ABYC Foundation has been awarded a grant from the Kathy and Jerry Wood Foundation to create the first industry accepted marine technology curriculum. The grant, along with donations from Yamaha and MarineMax, will allow the ABYC Foundation able to offer curriculum at a minimal cost to schools in need and feed trained students into two year post-secondary marine technical schools or directly into the workforce.
The marine industry as a whole is facing a shortage of qualified marine technicians. Ranging from boatyards to manufacturers, the industry is worth over $121 billion to the U.S. economy. With over 34,800 businesses employing close to 500,000 people, the marine sector is in need of a skilled workforce.
 
Many young people are unaware of the career opportunities that are offered within this exciting industry segment,” said Ed Sherman, ABYC vice president and education director. “This new funding will help us work with our longtime partner NOCTI (National Occupational Competency Testing Institute) to develop curriculum that matches the content of our previously published text book, Fundamentals of Marine Service Technology, with the goal of preparing and attracting the next generation to choose this path as a career, not just a job.”
 
Exams will be created in two versions, inland and coastal, to meet the desires and requests from teachers and administrators from around the country. Additionally, exams will be available in both English and Spanish language versions.
 
To learn more about the ABYC Foundation visit www.abycinc.org/foundation
 
#          #          #
 
Since 1954, the nonprofit American Boat & Yacht Council (ABYC) has developed safety standards for boat design, construction, equipage, repair and maintenance. ABYC is the premier global standards organization in the marine industry and a leader in technical education and technician certification.
 
The mission of the ABYC Foundation is to support ABYC in the development of standards, education, awareness initiatives and special projects that are designed to promote and foster boating safety.
 

Tuesday, July 5, 2016

Boat Building News


A local man is suing a boat manufacturer after being disfigured because of an equipment malfunction. Daniel Pena says he was almost killed, has a ...
 
The first group of students studying for a diploma in traditional boatbuilding in the unique Boathouse 4 at Portsmouth Historic Dockyard have now 
 
  The MMP is designed to introduce a new generation to boat building, repair and restoration, to foster an appreciation for skilled craftsmanship, and to .
 
For South Florida anglers, compact, high-performance sport fishing boats are key to a day on the water and a catch on the line. A day on the bay or the .
 
Brunswick Corporation (NYSE: BC) today announced it has acquired Thunder Jet, a designer and builder of heavy-gauge aluminum (HGA) boats.
 
 
CBMM boatyard staff and Chesapeake Wooden Boat Builders School instructors also will be on hand Saturday to offer boatbuilding workshops and ...